Confined Spaces
Safe Work Procedures

($79.95 plus GST)

Safe Work Procedures for Confined Spaces:

This Safe Work Procedure has been created to enable employers to instruct employees in safe operation within Confined Spaces. The document may be used for Induction Purposes, as part of a tender submission or incorporated into an existing OHS System.

Included in this Safe Work Procedure:

4 Page Complete Procedure
MS Word Format
Ready To Use
Version 4.0

The Safe Work Procedure is for unlimited printing and use, and is formatted for MSWord. The Procedure will be emailed to you directly.

While Working In Confined Spaces * Maintain communication with other fellow workers and the stand-by person * Alert the stand-by person of any hazards * Understand the rescue and work procedures prior to entrance * Exit the confined space quickly when required Confined Spaces work has inherient dangers and this four page Safe Work Procedure or Work Method Statement is a vital part of a safe work system. Working In Confined Spaces Safety Notes Before Entering Confined Spaces Consider * Are there any unusual or specific hazards associated with the confined space work, such as other workers or working with heat (welding)? * Are there any site occupancy restrictions and conditions, including access and egress, work schedules and emergency management arrangements, including emergency communication and evacuation plans? * Prior to any work-taking place in the confined space, the space must be naturally ventilated for a minimum period of ten minutes. If satisfactory atmospheric levels are not obtained then forced ventilation must be used until satisfactory gas test results are achieved. * Prior to any entry taking place, the atmosphere of the confined space must be tested to comply with the following. Oxygen >19.5% by volume and <23.5% by volume Flammable gas <5% by volume Hydrogen Sulphide <10 ppm - Carbon Monoxide <30 ppm * Confined space signage and barricading is applied at the entry site prior to entering

-->

Electric Welders
This Safe Work Procedure has been created to enable employers to instruct employees in safety protocols for Electric Welders.

Sandblasting
This Safe Work Procedure has been created to enable employers to instruct employees in safety protocols for Sandblasting - Abrasive Blasting.

Confined Spaces Safe Work Procedures

Safe Work Procedures for Confined Spaces:

Included in this Safe Work Procedure:

Confined Spaces
Safe Work Procedures